All Categories
    Filters
    Preferences
    Search Results

    Square Amputee Transfer Board

    Our square transfer board is designed for those who would like the security of extended handles. Must be used with removable wheelchair armrests.
    *

    The WadeBoard (patented) was designed for easy transfer from the bed to a wheelchair or from the wheelchair to another chair like a recliner or couch. The board should not be used on sharp inclines to avoid losing control while transferring. Use the following steps to successfully transfer:

    Transferring a double amputee from the bed to a wheelchair:

    1. Have the individual sit up in bed with a Gait Belt. Place the wheelchair next to the bed with the front of the wheelchair flat against the side of the bed with as little gap as possible. The individual should be approximately 20 inches from the wheelchair. Lock the wheels on the wheelchair.
       

    2. Place the narrow end of the WadeBoard on the seat to the wheelchair approximately covering 75% of the seat (figure1.1 ). The end of the WadeBoard with the handles should be on the bed next to the individual. Slide the end of the WadeBoard with the handles under the individual slightly and then ensure the board is flat on both surfaces.
       

    3. With the individual facing the wheelchair, have them hold both handles and gently slide the individual across the WadeBoard onto the wheelchair (figure1.2 ). Use the wheelchair handles as appropriate then have them turn around on the wheelchair (figure1.3 ). 
       

    4. Gently slide the board out from under the individual.

     

    Transferring a single amputee or a lame individual from the bed to a wheelchair:

    1. Have the individual sit up in bed with a Gait Belt. Place the wheelchair next to the bed with the front of the wheelchair flat against the side of the bed with as little gap as possible. The individual should be approximately 20 inches from the wheelchair. Lock the wheels on the wheelchair.
       

    2. Place the narrow end of the WadeBoard on the seat to the wheelchair approximately covering 75% of the seat (figure 2.1 ). The end of the WadeBoard with the handles should be on the bed next to the individual. Slide the end of the WadeBoard with the handles under the individual slightly and then ensure the board is flat on both surfaces.
       

    3. With the individual facing away from the wheelchair, have them hold both handles and gently slide backwards across the WadeBoard onto the wheelchair (figure 2.2 ). Use the wheelchair handles as appropriate.
       

    4. Gently slide the board out from under the individual.

    The WadeBoard (patented) was designed for easy transfer from the bed to a wheelchair or from the wheelchair to another chair like a recliner or couch. The board should not be used on sharp inclines to avoid losing control while transferring. Use the following steps to successfully transfer:

    Transferring a double amputee from the bed to a wheelchair:

    1. Have the individual sit up in bed with a Gait Belt. Place the wheelchair next to the bed with the front of the wheelchair flat against the side of the bed with as little gap as possible. The individual should be approximately 20 inches from the wheelchair. Lock the wheels on the wheelchair.
       

    2. Place the narrow end of the WadeBoard on the seat to the wheelchair approximately covering 75% of the seat (figure1.1 ). The end of the WadeBoard with the handles should be on the bed next to the individual. Slide the end of the WadeBoard with the handles under the individual slightly and then ensure the board is flat on both surfaces.
       

    3. With the individual facing the wheelchair, have them hold both handles and gently slide the individual across the WadeBoard onto the wheelchair (figure1.2 ). Use the wheelchair handles as appropriate then have them turn around on the wheelchair (figure1.3 ). 
       

    4. Gently slide the board out from under the individual.

     

    Transferring a single amputee or a lame individual from the bed to a wheelchair:

    1. Have the individual sit up in bed with a Gait Belt. Place the wheelchair next to the bed with the front of the wheelchair flat against the side of the bed with as little gap as possible. The individual should be approximately 20 inches from the wheelchair. Lock the wheels on the wheelchair.
       

    2. Place the narrow end of the WadeBoard on the seat to the wheelchair approximately covering 75% of the seat (figure 2.1 ). The end of the WadeBoard with the handles should be on the bed next to the individual. Slide the end of the WadeBoard with the handles under the individual slightly and then ensure the board is flat on both surfaces.
       

    3. With the individual facing away from the wheelchair, have them hold both handles and gently slide backwards across the WadeBoard onto the wheelchair (figure 2.2 ). Use the wheelchair handles as appropriate.
       

    4. Gently slide the board out from under the individual.

    Customers who bought this item also bought

    Car Caddie

    The Car Caddie makes it easier to get in-and-out of the car. Simply roll down your window and attach the CarCaddie to add an extra support handle on any door of the car.

    Pack of 10 Button Helpers

    Button Helper attaches to existing shirt buttons and empowers wearers to dress themselves with dignity, independence, and ease. A box includes 10 magnetic adapters, which is enough for 1 standard dress shirt or 3-5 polo shirts. This patented product stays on in the wash and installs without sewing.

    Automobility Solution

    The Automobility Solution is an all-in-one solution to make getting in-and-out of your car... Easy! This combo pack contains our Swivel-Seat-Cushion to help pivot your legs; and Handy Bar to help you easily get in-and-out of your car for stress-free traveling.

    UE Ranger Neuro

    UE Ranger Neuro: Includes Telescopic Tube, 2 Bases, and *HAND ATTACHMENT OF YOUR CHOICE* and Neuro Applications Manual

    **Choose a Grip/Hand Option and/or any additional accessory mount**

    Original Cuff Weights

    The Cuff rehabilitation wrist and ankle weight has been proven effective in hospitals for over 30 years. It contours to snuggly fit the ankle, wrist, and even thigh. Its long closure strap assures a secure and comfortable fit even during the most strenuous exercise program. It features heavy-duty materials and double-stitching throughout. The Cuff exercise weights are color-coded, marked with both pounds and kilograms and have grommets for hanging on any peg-board weight rack. Each sold individually.