Manosplint X-Lite Splinting Supplies

Be the first to review this product

Choose from the products below.

X-Lite Plus Cast Rolls

2 rolls of XLite Plus Cast 6" W X 2 yds. A finer mesh with soft fabric surface.

Choose Color *

X-Lite Plus Dispenser Roll

X-Lite Plus Dispenser Roll in black, blue, red in 6" W X 33ft. Sold as each

Choose Color *

X-Lite Plus Edging Tape

Edging tape gives a neat finish to the splint and secures a soft edge. It offers extra stability to the splint since it is made from our splinting material X-Lite® PLUS. Supplied in a dispenser box. Sold as each. Heat in 158° F (70° C) warm water to activate. Size 1" x 4m.

Choose Color *

X-Lite Thermoplastic Hook

1 Dispenser box, 5 sheets per box. An easy solution to attach your loop closure straps to your splint or brace. Bonded to the back of the ”hook” is the same X-Lite® resin used in the Finishing/Edging Tape which bonds instantly and permanently on all our materials

Choose Color *

Overview
Health Benefits
Use Instructions

Biodegradable: according to ISO 148551-1 standard, showed that X-Lite® is 25% biodegraded after 90 days
Excellent Ventilation: open structure in the material gives great ventilation and comfort. This allows the skin to breathe, besides providing an optimal environment for wound healing
Strong Material, Less Plastic
Use significantly less layers of material for equal strength compared to other splinting and casting materials on the market
Add layers for additional rigidity without compromising the low profile. Add strips to areas where additional reinforcement or support is desired
Reusable and Remoldable: X-Lite can be reheated an unlimited amount of times, allowing you to reuse rolls and leftovers. Make small changes on an already made cast/splint instead of a new one costing extra money, extra time and discomfort for your patient

100% free from isocyanates with zero negative effects to your health
Engineered to benefit the environment and your health in more ways than one. It’s unique structure and features makes it the ideal alternative to industry standard casting materials.
Made of non-toxic material:
- For the industry standard synthetic casting tapes, the isocyanates have negative effects on your health such as irritation and asthma, requiring special ventilation equipment, apron, gloves and a mask in order to protect the therapist. In the manufacturing process for all X-Lite® materials, any toxic instances are extracted, making it 100% free from isocyanates and fibreglass.
Less waste:
- Due to the robust nature of X-Lite®, you are able to reheat it any number of times, therefore allowing the therapist to use all of the material without having to waste any. This is especially impressive when compared to the standard market material which isn’t reusable, causing a lot of waste.
Ideal material:
- The cotton resin and reactive impregnation means that there is no risk for the patient or therapist. Less material is required requiring only two layers therefore less material will be used. It is patient friendly, economic and safer for health and the environment.

X-Lite should be heated in a splint bath set at 155-158°F
Immerse in water for approximately 3 minutes and make sure water penetrates rolls
Always ensure that the material is properly heated before you start working
Use tongs to remove X-Lite® from the water bath to avoid direct contact with the water
Allow excess water to drain from the material. The material itself will not become warm
Protect and cover any wounds or scarring with appropriate dressings. For fracture casting or splinting apply stockinette and proceed with undercover padding to protect the skin before applying the material
Spot heat areas on the splint for permanent bond of accessories, straps and hook
Re-shape any number of times for the same patient. Reheat unused leftovers and rolls
Make small changes by spot heating a completed cast or splint with a regular hairdryer. Always keep your own hand close to the area you heat to avoid burning the patient
Cool the splint or cast with cold packs or ice spray for faster setting

Biodegradable: according to ISO 148551-1 standard, showed that X-Lite® is 25% biodegraded after 90 days
Excellent Ventilation: open structure in the material gives great ventilation and comfort. This allows the skin to breathe, besides providing an optimal environment for wound healing
Strong Material, Less Plastic
Use significantly less layers of material for equal strength compared to other splinting and casting materials on the market
Add layers for additional rigidity without compromising the low profile. Add strips to areas where additional reinforcement or support is desired
Reusable and Remoldable: X-Lite can be reheated an unlimited amount of times, allowing you to reuse rolls and leftovers. Make small changes on an already made cast/splint instead of a new one costing extra money, extra time and discomfort for your patient

Manosplint X-Lite Splinting Supplies

Manosplint Digital Heat Pan

Create Personal Supply List