J Patella Stabilizing Knee Brace | Medial or Lateral Support for Subluxation and Dislocation

Designed to help with patella subluxation, patellar dislocation, patellofemoral syndrome, patella tendon injury rehab, and knee instability

Choose Size *

Overview

Features

Designed to help with patella subluxation, patellar dislocation, patellofemoral syndrome, patella tendon injury rehab, and knee instability
Reversible buttress for medial and lateral relief
Breathable open-patella design
Neoprene, Latex-free
This patella sleeve is designed for petite to plus-size men and women. Wide range sizes are available from S-4XL. The knee stabilizer sleeve is 12 ¾” tall. Sizes are based on the circumference of the knee 6” above the mid-patella and 6” below the mid-patella:
- Small: 12"-14" | 11"-12.5"
- Medium: 15"-17.5" | 12"-14"
- Large: 17.5"-20" | 14"-15.5"
- X-Large: 19"-22" | 15"-16.5"
- 2X-Large: 22"-25" | 16"-18.5"
- 3X-Large: 24"-28" | 19"-21"
- 4X-Large: 28"-32" | 21"-22"
How do I put it on? To apply this brace, first, loosen all straps and switch the buttress to the desired right or left side for inner or outer knee pain relief. Pull the sleeve up your leg, centering the open-patella circle directly over your kneecap. Secure buttress straps through buckles and tighten them to the desired support level. Secure and tighten the thigh and calf straps.
Washing instructions: Hand wash in warm water with mild detergent. Allow to air dry completely before reapplying.

Features

Designed to help with patella subluxation, patellar dislocation, patellofemoral syndrome, patella tendon injury rehab, and knee instability
Reversible buttress for medial and lateral relief
Breathable open-patella design
Neoprene, Latex-free
This patella sleeve is designed for petite to plus-size men and women. Wide range sizes are available from S-4XL. The knee stabilizer sleeve is 12 ¾” tall. Sizes are based on the circumference of the knee 6” above the mid-patella and 6” below the mid-patella:
- Small: 12"-14" | 11"-12.5"
- Medium: 15"-17.5" | 12"-14"
- Large: 17.5"-20" | 14"-15.5"
- X-Large: 19"-22" | 15"-16.5"
- 2X-Large: 22"-25" | 16"-18.5"
- 3X-Large: 24"-28" | 19"-21"
- 4X-Large: 28"-32" | 21"-22"
How do I put it on? To apply this brace, first, loosen all straps and switch the buttress to the desired right or left side for inner or outer knee pain relief. Pull the sleeve up your leg, centering the open-patella circle directly over your kneecap. Secure buttress straps through buckles and tighten them to the desired support level. Secure and tighten the thigh and calf straps.
Washing instructions: Hand wash in warm water with mild detergent. Allow to air dry completely before reapplying.

Console.log(Model.FullDescription);

Customers who bought this item also bought

Transitions Angled Entry Mat

The TRANSITIONS Angled Entry Mat accommodates doorways, raised landings, and floor offsets to provide a smooth transition. This durable mat is ideal for high-traffic areas and will not buckle under heavy loads. Made from 100% recycled rubber, a naturally slip-resistant material, the mat provides a superior grip for added traction.

Transitions 2.5" H Angled Entry Welcome Mat

The TRANSITIONS Angled Entry Mat provides a smooth transition through doorways with raised thresholds and can help eliminate trip hazards caused by raised landings and floor offsets. Made from recycled rubber, this durably designed threshold mat is ideal for high-traffic areas and will not buckle under heavy loads. It is naturally slip-resistant and is ideal for indoor or outdoor use, offering superior traction wherever it’s placed. Available in black or grey, with or without the recessed “Welcome”, and in 1.5” and 2.5” heights, but can be trimmed or notched for the perfect fit.

M-Brace Knee Wrap

The Knee Wrap is used as a protective support following muscular, articular or ligamentus injuries of the patellar region. Two different materials were used in its construction; the inside is made of soft cotton velour that is breathable and does not cause skin irritation and the outside is a special nylon that permits the Velcro to grip and stay fastened.

PVI Rubber Threshold Ramp

Foot traffic is quiet and stable. Made of 100% recycled rubber with molded miter ends. Designed and tested for maximum slip resistance. Field fitted with basic cutting tools. Simple installation in 15 to 25 minutes – no fasteners required. Weight capacity 1000 lbs!

Silver Spring Lightweight Foam Threshold Ramp

Getting around your home or office using a wheelchair or a walker just got easier thanks to this new, state-of-the-art foam threshold ramp. Available exclusively from Discount Ramps, this specialty ramp combines a lightweight foam interior with a strong polyurethane coating, making these portable threshold ramps the absolute lightest on the market without sacrificing strength or durability. A rubberized non-slip coating provides maximum traction for both wheelchairs and foot traffic in all weather conditions, will not scratch or mar floors, and easily wipes clean with soap and water. The foam and polyurethane construction makes the ramp resistant to moisture, and it will never rust or corrode. Ready to use right out of the box, there is no assembly required. This ramp measures 30“ L x 36” W, accommodates a maximum rise of five inches, and comes in a neutral gray color to blend in with any environment.